Solar Water Heater Wholesale , China Custom-made Solar Water Heater , Customized Logoed Printed , China Solar Water Heater

Item No.: MemberKE58S
U.Price:
Payment: T/T
Mini Order:
Description:
Non-pressure Solar Water Heater, Solar Collector System, Solar Panel, Solar Energy Geyser KE58S Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Aluminum Galvanized sheet Folded from mould with powder painting Outer tank dia.460mm Frame: Aluminum with anti-oxidation treatment Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L

Item No.: SusanKES58
U.Price:
Payment: T/T
Mini Order:
Description:
Pressure Solar Water Heater, Solar Collector, Solar Working Station, Renewable Energy KEH58 Vacuum tube: 58x1800mm Inner tank: Stainless Steel 304 2B food grade Outer tank: Stainless Steel Frame: Stainless Steel Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3 Available sizes: 18, 20, 22, 24, 28, 30, 36 tubes with capacity 135L up to 325L

Item No.: Fandy090708002
U.Price:
Payment: T/T
Mini Order:
Description:
Solar water heater: 1.*Water tank capacity is 205L,water tank is 470mm in diameter. *Shell is choi board,thickness 0.4 mm. *Water tank liner is SUS304-2B food grade stainless steel thickness 0.4mm *Insulation is the constant pressure foaming pu obturator rate 98% 2.*stents (Galvanized thickening stent) *Thickness 0.4mm Width 15mm 3.*Vacuum Tube(Metal superconductivity tube) Vacuum pressure0.6MPa *Wall thickness 1.6mm,Pulls out the vacuum 2 hours *No vacuum coating length less than 20mm *Single vacuum is 2.5 KG weight 4.Electric heating 1500W or 4000W

Item No.: Fandy090225001
U.Price:
Payment: T/T
Mini Order:
Description:
Solar Water Heater 1.inner tank: imported SUS 304 stainless steel with thickness of 0.31mm±0.03mm 2.outer tank:pearl plate steel 0.37mm 0.03mm 3.The diameter of the tank:?460 4.Frame:galvanized plate steel 1.5mm 160L,480L

Item No.: Fandy07
U.Price:
Payment: T/T
Mini Order:
Description:
1) The entire automatic solar-powered water heater uses the multi-storage water tank combination 2) Using the hot water conduction technology, channel the higher temperature water upper in tank towards the next water tank; we get the highest temperature hot water at outlet of the last water tank 3) promote electric heating efficiency and the intellectualization, using automatically water-added technology, thus shield the vacancy flaw in cabin, well decrease loss of heat which because of the vacancy air convection, lets the user time-saving, saves the electricity, free from worry Specifications: 1) Pipes: 58 x 1,800mm 2) Water tank material (inside): imported SUS304 2B type of stainless steel (also applicable for foodstuff standard) 3) Water tank material (outside): fluorine-carbon coating plate PVDF 4) Heat holding layer: computerized temperature holding; polyurethane froth, thickness of heat-holding layer: 50mm-70mm 5) Bracket material: inter-converted tri-pieces frame with diverse applications; imported zinc-coated steel with spraying 6) Sealed ring: macromolecule silicon rubber 7) Reflecting angle: 38?- 50? 8) Temperature (sunny season): 50 - 96?/day 9) Water capacity: 160L - 480L Packing: 1pc/carton

Item No.: BernieMemberyijiale09
U.Price:
Payment: T/T
Mini Order:
Description:
1) Water tank and solar collector separated, water circulated by circulation pump, easy to install 2) Super condition heat pipe, quick heating 3) Thickened tank, perfect warming, keep temperature more than three days 4) Water won't flow in vacuum tube, still can work under -40?, never volatile tubes 5) Module design, arbitrary combination, which can meet the demand of large water consumption 6) Auxiliary electric heating when no sunlight Packing: 1pc/ctn

Item No.: LindaA060509008
U.Price:
Payment: T/T
Mini Order:
Description:
Solar Collector Water Heater

Item No.: BernieMemberyijiale08
U.Price:
Payment: T/T
Mini Order:
Description:
1) The pressure of hot water is pressure of tap water directly, you can enjoy more comfortable shower 2) There is no need to wait 3) Completely automatic operation 4) Hot water from tap water directly, more healthy and clean, and can promote quality of your life 5) Temperature preservation can last for 80 hours 6) Without volatile tubes 7) Without incrusting, long usage life Specifications: 1) Coil material: copper (length 20-50 meter ) 2) Water tank material (inside): imported SUS304 2B type of stainless steel (applicable for foodstuff standard) 3) Water tank material (outside): fluorin-carbon coating plate, PVDF 4) Water capacity: 180L, 210L, 240L, 280L 5) Pressure: 0.6MPa 6) Heat preservation: 80-90 hours 7) Hail resistance: 25mm 8) Tube standards: 18, 20, 24, 30, or 32 tubes with 58mm diameter and 1.8m length Packing: 1pc/ctn

Item No.: BernieC20050406309
U.Price:
Payment: T/T
Mini Order:
Description:
Product Name Glass-evacuated Tube Solar Water Heater specifications Product Name: Glass-evacuated Tube Solar Water Heater Place of Origin: China Outer packing: export carton Standard Met: ISO9001 Features: 1) Glass-evacuated Tube: Hard borosilicate glass tube(diameter:47mm or 58 mm; length:1500 mm or 1800 mm), 30 mm hailstone resistant. 2) Outer tank material: stainless steel plate 3) Inner tank material: SUS304 food grade stainless steel plate 4) Operating pressure: no pressure (open type) 5) Welded by high efficiency rolling welding machine with imported high quality stainless steel sheet (SUS304) 6) 55mm high dense polyurethane integral foam ensures the good heat-preservation 7) Made of imported high quality stainless steel that has good corrosive resistance and application of temperature 8) Reflection sheet is assembled from many stainless steel sheets, easy to install with the advantages of ventilation and preventing snow from collecting 9) Assembles to bar with screws for easy shipping and installation 10) Support frame: stainless steel plate with thickness of 1.2mm Export Markets Worldwide Standard Met ISO9001

Item No.: BernieMemberyijiale10
U.Price:
Payment: T/T
Mini Order:
Description:
The split pressurized solar water heater is composed of heat collector, storage tank,electric control device, working station and installation parts. Features: 1) Uses structure of heat collector separated from storage tank 2) The heat collector can be put on balcony, roof or flat place or outdoor wall surface. The storage tank can be put anywhere in room according to your need 3) Successfully carries out installation of separation according to fabricating yard and is harmoniously blended with architecture 4) The water quality achieved the tap water standard, and it is environmentally friendly and energy saving 5) The heat transfer rate is quick, without volatile tubes and without incrusting 6) The heat exchange uses the natural circulation form, which saves electricity 7) Digital display of water temperature 8) Anti-freeze: no water inside the tubes when it works Specifications: 1) vacuum tube with heat Pipe : 47 x 1,500mm; 58 x 1,800mm 2) Water tank capacity: 100L-400L 3) The length of heat-gathered tube: 1.5m/1.8 m 4) The number of heat-gathered tube: 12/15/20/24/30 /36 5) Pressure: 0.6MPa 6) Heat holding material: polyurethane 7) Water tank material (inside): porcelain enamel or stainless steel 8) Water tank material (outside): galvanized sheet 9) Mainfold material: Aluminum alloy & red copper.

Item No.: Sharry84191900
U.Price:
Payment: T/T
Mini Order:
Description:
Features: 1) Inner tank: sus304-2B stainless steel, advanced welding technique, thickness 0.5mm2) Out shell: zinc and aluminum coated steel sheet or color steel sheet3) Corrosion resistant4) Isolation layer: 50-65mm imported polyurethane foam for superior heat preservation5) Frame materials: galvanized steel, electrostatic powder coated6) Type: 15, 18, 20, 24, 30 tubes7) Capacity: 130- 250 liter Technical data: Number of Tubes 10, 15, 20, 22, 25, 30 Length of Tube 1800 mm Outer Tube Diameter 58 mm Inner Tube Diameter 47 mm Glass Tube Thickness 1.6 mm Tube Thermal Expansion 3.3 X 10 -6 oC Tube Material Borosilicate Glass 3.3 Absorptive Coating Graded AI-N/AI Absorptance > 90% (AM 1.5) Emittance 7 % (100 oC) Vacuum P < 0.005 Pa Stagnation Temperature < 220 oC Heat Loss < 0.8 W/m2. oC) Reflector Ginning Alumnium reflector plate The out cover of the solar connector color steel or stainless steel. Frame Zinc coated steel corner sputtering frame Insulation Polyurethane Tested pressure 1.0MPa Working pressure 0.6MPa Daily efficiency >50%

Item No.: kathyC20050331332
U.Price:
Payment: T/T
Mini Order:
Description:
Product Name solar water heater Specifications Product Name: Solar Water Heater Model No: Price Terms: FOB Port:Wenzhou Origin: China Brand Name: Kanch Payment Terms: L/C or T/T Supply Ability: 10,000pcs/year Product Description: Features: 1) Includes 14 tubes - 35 tubes 2) Capacity: 105L - 265L Model no.: KTR-1514P-Z, KTR-1516-Z, KTR-1518P-Z, KTR-1520P-Z, KTR-1524P-Z, KTR-1528P-Z, KTR-1530P-Z, KTR-1535P-Z Outer packing: Carton dimensions: KTR-1514P-Z: 114 x 53.5 x 50.5cm KTR-1516P-Z: 128 x 53.5 x 50.5cm KTR-1518P-Z: 142 x 53.5 x 50.5cm KTR-1520P-Z: 156 x 53.5 x 50.5cm KTR-1524P-Z: 184 x 53.5 x 50.5cm KTR-1528P-Z: 212 x 53.5 x 50.5cm KTR-1530P-Z: 226 x 53.5 x 50.5cm KTR-1535P-Z: 261 x 53.5 x 50.5cm

Item No.: Memberyijiale08
U.Price:
Payment: T/T
Mini Order:
Description:
1) It can withstand pressure of tap water when it works 2) There is no need to wait 3) Completely automatic operation 4) Drinking water quality to promote life quality 5) Temperature preservation can last for 80 hours 6) Without volatile tubes, without incrusting, long usage life 7) It uses a copper coil as the heat exchanger inside the tank, rather than water 8) The storage tank acts as a thermal source 9) Main pressure cold water flows directly through the copper coil, making it hot and good in anti-corrosion Outer packing: 1pc/ctn

Item No.: Memberyijiale06
U.Price:
Payment: T/T
Mini Order:
Description:
1) It adopts hi-tech nanotechnology, receives the light from all angles, solve problems of solar water heater's bad of reflect light and trouble installation; heat increases by 15% than the common solar water heater, over 5% towards three-high-pipe 2) The application of new technology that Yijiale jumbo lighted-focused vacuum pipe with interior reflecting layer makes Yijiale solar energy became a pioneer in market Specifications: 1) Pipes: lighted-focused vacuum pipe, 58 χ 1,800mm 2) Water tank material (inside): imported SUS304 2B type of stainless steel (applicable for foodstuff standard) 3) Water tank material (outside): fluorine-carbon coating plate PVDF 4) Heat holding layer: computerized temperature holding; polyurethane froth, thickness of heat-holding layer: 50mm-70mm 5) Bracket material: inter-converted tri-pieces frame with diverse applications: imported zinc-coated steel with spraying 6) Sealed ring: macromolecule silicon rubber Packing: 1pc/ctn

Item No.: Memberyijiale05
U.Price:
Payment: T/T
Mini Order:
Description:
1) Three-high vacuum tube: 47 x 1,500mm, 58 x 1,800mm, 70 x 2,000mm 2) Water tank material (inside): imported SUS304 2B type of stainless steel 3) Water tank material (outside): fluorine-carbon coating plate PVDF 4) Heat holding layer: computerized temperature holding; polyurethane froth, thickness of heat-holding layer: 50-70mm 5) Bracket material: aluminum alloy 6) Sealed ring: macromolecule silicon rubber 7) Reflecting angle: 38-45? 8) Temperature (sunny season): 40-96?/day

Item No.: Memberyijiale04
U.Price:
Payment: T/T
Mini Order:
Description:
1) Three-high vacuum tube: 47 x 1,500mm, 58 x 1,800mm, 70 x 2,000mm 2) Water tank material (inside): imported SUS304 2B type of stainless steel, also applicable for foodstuff standard 3) Water tank material (outside): fluorine-carbon coating plate PVDF 4) Heat holding layer: computerized temperature holding; polyurethane froth, thickness of heat-holding layer: 50mm-70mm 5) Bracket material: imported zinc-coated steel with spraying 6) Sealed ring: macromolecule silicon rubber 7) Reflecting angle: 38 - 45 degrees 8) Temperature (sunny season): 40 - 96?/day

Item No.: Memberyijiale03
U.Price:
Payment: T/T
Mini Order:
Description:
1) Capacity: 100L - 280L 2) Tank diameter: 420mm, 450mm, 470mm, 490mm 3) Bracket material adopts inter-converted tri-pieces frame with diverse applications or imported zinc-coated steel with spraying 4) Stronger hail resistant ability, hail resistance: 25mm 5) Long time of temperature preservation 6) Can bear temperature of 250? when exposed to sun without water 7) Meets the demand of families whose structure of building is flat and inclined roof 8) Meets requirements of washing clothes, abstersion and shower

Item No.: Memberyijiale02
U.Price:
Payment: T/T
Mini Order:
Description:
1) Capacity: 100L - 300L 2) Tank diameter: 420mm, 470mm, 490mm 3) Stronger hail resistant ability, hail resistance: 25mm 4) Long time of temperature preservation 5) Can bear temperature of 250? when exposed to sun without water 6) For flat and inclined roofs 7) Meets requirement of washing clothes, abstersion and shower Specifications: 1) Three-high vacuum tube: 47 x 1,500mm, 58 x 1,800mm, 70 x 2,000mm 2) Water tank material (inside): imported SUS304 2B type of stainless steel 3) Water tank material (outside): fluorine-carbon coating plate PVDF 4) Heat holding layer: computerized temperature holding; polyurethane froth, thickness of heat-holding layer: 50mm-70mm 5) Bracket material: imported zinc-coated steel with spraying 6) Sealed ring: macromolecule silicon rubber 7) Reflecting angle: 38 - 45 degrees 8) Temperature (sunny season): 40 - 96?/day Outer packing: 1pc/ctn

Item No.: Memberyijiale01
U.Price:
Payment: T/T
Mini Order:
Description:
1) Tank diameter: 420mm, 470mm, 490mm 2) Capacity: 85L / 100L / 120L / 135L / 180L / 200L / 240L / 260L / 300L 3) Three-high vacuum tube size: a) Diameter: 47mm / 58mm / 70mm b) Length: 1.5m / 1.6m / 1.8m / 2.1mm c) Quantity: 15 / 18 / 20 / 24 / 30 / 32 / 36 4) Material: a) Water tank (interior): 304 2B stainless steel b) Water tank (exterior): color steel d) Bracket: aluminum alloy or imported zinc-coated steel with spraying Packing: 1pc/ctn

Item No.: ShadowA060512017
U.Price:
Payment: T/T
Mini Order:
Description:
Specifications: Automatic temperature control system. The temperature can be adjusted to keep it constant. Not affected by low water pressure, power surge and suitable for low water pressure areas. Automatic power supply cut off when overheating Vertical design available for both indoors/outdoors installation Over 30mm thickness insulation by polyurethane foam which ensures its high quality. It prevents heat loss and saves money. Size:2000x1060x70 x 2 pcs Absorber type: Copper/alum. Capacity:120,260,300,400,500l Power rating:3kw Inlet/outlet dimension:3/4

Item No.: 84191900
U.Price:
Payment: T/T
Mini Order:
Description:
Features: Evacuated tubes convert solar energy into thermal energy that is transferred to heat pipes by an aluminum fin with high solar energy absorption and low heat radiance loss. The heat pipe adopts such kind of character that could transmit quantity of heat under low temperature. Character: 1. With a testing pressure of 1.0 MPa, this system has a working pressure of 0.6 MPa. 2. Solar water heaters can still work even with several tubes broken. 3. Highly efficient insulation with integrated polyurethane foam. Technical data: Number of Tubes 10, 15, 20, 22, 25, 30 Length of Tube 1800 mm Outer Tube Diameter 58 mm Inner Tube Diameter 47 mm Glass Tube Thickness 1.6 mm Tube Thermal Expansion 3.3 X 10 -6 oC Tube Material Borosilicate Glass 3.3 Absorptive Coating Graded AI-N/AI Absorptance > 90% (AM 1.5) Emittance 7 % (100 oC) Vacuum P < 0.005 Pa Stagnation Temperature < 220 oC Heat Loss < 0.8 W/m2. oC) Reflector Ginning Alumnium reflector plate The out cover of the solar connector Alummium aloy manifold. Frame Alummium aloy frame Heat pipe type Big heat pipe Insulation Polyurethane Tested pressure 1.0MPa Working pressure 0.6MPa Daily efficiency >50%

Item No.: A060506001
U.Price:
Payment: T/T
Mini Order:
Description:
Features: 1) Can withstand the pressure of tap water when working 2) With real drinking water quality and promotes life quality 3) There is no need to wait and no limit to using 4) It is of completely automatic operation and humanity design 5) The effect of temperature preservation can last 80 hours 6) It refuses volatile tubes, leaving no anxiety 7) Without incrustant, its life-span is longer 8) Upgraded technology and wider range

Item No.: A060505073
U.Price:
Payment: T/T
Mini Order:
Description:
Features: 1) Uses a copper coil as the heat exchanger inside the tank, rather than water 2) The storage tank acts as a thermal source 3) Mains pressure cold water flows directly through the copper coil making it hot Picture Key: 1) Storage Tank Fill 2) Heat Exchanger Mains Cold In 3) Thermal Source 4) Copper Coil As Heat Exchanger 5) Vent 6) Heat Exchanger Hot Out

Item No.: A060505020
U.Price:
Payment: T/T
Mini Order:
Description:
Features: 1) Exterior tank: a) Made of imported plating zinc plate or color armor plate b) Thickness: 0.4mm 2) Interior tank: a) Made of imported SUS 2B stainless steel b) Wall thickness: >0.5mm 3) End cap: stainless steel inner buckle 4) Bracket: aluminum alloy bracket 5) Thermal insulation level: 55mm imported polyurethane overall froth 6) Exterior diameter: 420mm, 470mm 7) Water tank capacity: 80 .300L 8) Heat concentration element: 47 x 1,500mm glass vacuum pipes 9) Pressure endurance: <0.05MPa

Item No.: A060505019
U.Price:
Payment: T/T
Mini Order:
Description:
Features: 1) Exterior tank: a) Made of imported plating zinc plate or color armor plate b) Thickness: 0.4mm 2) Interior tank: a) Made of imported SUS 2B stainless steel b) Wall thickness: >0.5mm 3) End cap: stainless steel inner buckle 4) Bracket: aluminum alloy bracket 5) Thermal insulation level: 55mm imported polyurethane overall froth 6) Exterior diameter: 500mm 7) Heat concentration element: 70 x 2,000 / 2,100mm glass vacuum pipes 8) Pressure endurance: <0.05MPa