Promotional Gifts - Quick Links. Accept Mixed Orders of Bulk GPS Patch Antenna, Personalized Logo Imprinted.
Home
»
Electronics »
GPS Navigations
»
Wholesale GPS Patch Antenna from China for Your Logo Branded & Imprinted. Promotional GPS Navigations Direct From Top China Wholesale Source!
GPS Patch Antenna
: 10 Products foundWholesale GPS Patch Antenna from China for Your Logo Branded & Imprinted. Promotional GPS Navigations Direct From Top China Wholesale Source!
Wholesale GPS Patch Antenna from China
GPS External Active Antenna
Item No: MemberVTGPSA-4
Update time:
Description:
1.1 LNA/Filter Form 1 No. Item Specifications Post Environmental Tolerance 1 LNA Gain 28? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 14dB Min f0+50MHz 18dB Min f0-50MHz 30dB Min f0+100MHz 42dB Min f0-100MHz ?.0 dB 4 DC Voltage 3~5V 5 DC Current 8~15mA 1.2 Mechanical Form 2 No. Item Specification 1 Cable RG174 3m/5m or others 2 Connector SMA/SMB/MCX or others 3 Plastic Housing Black 4 Mounting Magnetic/Stick 5 Weight 0.03kg(Magnetic)/0.02kg(Stick)
GPS Patch Antennas
Item No: MemberGPS Patch Antennas
Update time:
Description:
GPS Patch Antennas Part Number Working Frequency (MHz)B Center Frequency (MHz) Band Width (MHz) V.S.W.R (in BW) (dB) Gain Impendance (ohm) Dimension (mm) DAS1575R25B44 1575.42 1573 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25C14 1575.42 1575 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25D14 1575.42 1580 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25E14 1575.42 1585 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25F14 1575.42 1590 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25G14 1575.42 1595 ≥10 ≤1.5 4.5 50 25?5? DAA1575R25C14 1575.42 1575 ≥10 ≤1.5 4.5 50 25?5? DAA1575R25D14 1575.42 1580 ≥10 ≤1.5 4.5 50 25?5? DAA1575R25E14 1575.42 1585 ≥10 ≤1.5 4.5 50 25?5? DAS1575R25B12 1575.42 1575 ≥10 ≤1.5 4.5 50 25?5? DAA1575R25C12 1575.42 1575 ≥10 ≤1.5 4.5 50 25?5? DAS1575R19C44 1575.42 1578 ≥6 ≤1.5 1 50 19?9? DAS1575R18C44 1575.42 1578 ≥6 ≤1.5 1 50 18?8? DAA1575R17C44 1575.42 1578 ≥6 ≤1.5 1 50 17?7?
GPS Inner Active Patch Antenna
Item No: MemberVTGPSIA-1
Update time:
Description:
1 Center Frequency（MHz1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW ） 1.5:1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω
GPS Inner Active Patch Antenna
Item No: MemberVTGPSIA-2
Update time:
Description:
1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW ） 1.5:1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω
GPS Inner Active Patch Antenna
Item No: MemberVTGPSIA-3
Update time:
Description:
1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ?1MHz 3 V.S.W.R（in BW ） 1.5:1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω ?
GPS Inner Active Patch Antenna
Item No: MemberVTGPSIA-5
Update time:
Description:
1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW ） 1.5:1 ? 4 Gain（Zenith） 2 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω ?
Mini Type External GPS Antenna
Item No: MemberVTGPSA-1
Update time:
Description:
1 LNA Gain 28? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 14dB Min f0+50MHz 18dB Min f0-50MHz 30dB Min f0+100MHz 42dB Min f0-100MHz ?.0 dB 4 DC Voltage 3~5V 5 DC Current 8~15mA
GPS antenna
Item No: MemberVTGPSA-6
Update time:
Description:
1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW） 1.5︰1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω 1 LNA Gain 28? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 12dB Min f0+50MHz 16dB Min f0-50MHz ?.0 dB 4 DC Voltage 2.2~5 V 5 DC Current 5~15 mA 1 Cable RG174 3m/5m or others 2 Connector SMA/SMB/MCX or others 3 Plastic Housing Black 4 Mounting Screw VTGPSA-6 VTGPSA-6.pdf 1 Dimension（Unit：mm） 2 Electrical Characteristics 3.1 Dielectric Antenna Form 1 No. Item Specifications Post Environmental Tolerance 1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW） 1.5︰1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω ? 3.2 LNA/Filter Form 2 No. Item Specifications Post Environmental Tolerance 1 LNA Gain 28? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 12dB Min f0+50MHz 16dB Min f0-50MHz ?.0 dB 4 DC Voltage 2.2~5 V 5 DC Current 5~15 mA 3.3 Mechanical Form 3 No. Item Specification 1 Cable RG174 3m/5m or others 2 Connector SMA/SMB/MCX or others 3 Plastic Housing Black 4 Mounting Screw 4 Reliability Condition：Temperature: 40?℃ Load: DC=5V?.5 V Quantity: 2000pcs Sustained Time: 480h 5 Environmental Specifications Post Environmental Tolerance (Refer to the form 1~2 ) Condition：Temperature range 25?℃ Relative Humidity range 55~75%RH Operating Temperature range -40℃~+85℃ Storage Temperature range -40℃~+100℃ 5.1 Moisture Proof The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40?℃and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition. 5.2 Vibration Resist The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 5.3 Drop Shock The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device. 5.4 High Temperature Endurance The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80?℃for 24? hours and 1~2 hours recovery time under normal temperature. 5.5 Low Temperature Endurance The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40℃?℃for 24? hours and to 2 hours recovery time under normal temperature. 5.6 Temperature Cycle Test The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25℃ and high temperature +85℃ for 30? min each by 5 cycles and 1 to 2 hours recovery time under normal temperature. 6 Weatherproof Put the antennas in 1m deep water for 12h, and find 100% waterproof.
GPS antenna
Item No: MemberVTGPSA-7
Update time:
Description:
VTGPSA-7 1 Dimension（Unit：mm） 2 Electrical Characteristics 3.1 Dielectric Antenna Form 1 No. Item Specifications Post Environmental Tolerance 1 Center Frequency（MHz） 1575.42 MHz ? MHz 2 Band Width（MHz） ? MHz ? MHz 3 V.S.W.R（in BW） 1.5︰1 ? 4 Gain（Zenith） 3 dB ?.5 dB 5 Polarization RHCP ? 6 Impedance 50 Ω ? 3.2 LNA/Filter Form 2 No. Item Specifications Post Environmental Tolerance 1 LNA Gain 28? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 12dB Min f0+50MHz 16dB Min f0-50MHz ?.0 dB 4 DC Voltage 2.2~5 V 5 DC Current 5~15 mA 3.3 Mechanical Form 3 No. Item Specification 1 Cable RG174 3m/5m or others 2 Connector SMA/SMB/MCX or others 3 Plastic Housing Black 4 Mounting Magnet/Adhesive 4 Reliability Condition：Temperature: 40?℃ Load: DC=5V?.5 V Quantity: 2000pcs Sustained Time: 480h 5 Environmental Specifications Post Environmental Tolerance (Refer to the form 1~2 ) Condition：Temperature range 25?℃ Relative Humidity range 55~75%RH Operating Temperature range -40℃~+85℃ Storage Temperature range -40℃~+100℃ 5.1 Moisture Proof The device should satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature 40?℃and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition. 5.2 Vibration Resist The device should satisfy the electrical characteristics specified in form 1~2 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 5.3 Drop Shock The device should satisfy the electrical characteristics specified in form 1~2 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device. 5.4 High Temperature Endurance The device should satisfy the electrical characteristics specified in form 1~2 after exposed to temperature 80?℃for 24? hours and 1~2 hours recovery time under normal temperature. 5.5 Low Temperature Endurance The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the temperature -40℃?℃for 24? hours and to 2 hours recovery time under normal temperature. 5.6 Temperature Cycle Test The device should also satisfy the electrical characteristics specified in form 1~2 after exposed to the low temperature -25℃ and high temperature +85℃ for 30? min each by 5 cycles and 1 to 2 hours recovery time under normal temperature. 6 Weatherproof Put the antennas in 1m deep water for 12h, and find 100% waterproof.
GPS Marine Antenna
Item No: MemberVTGMA-1
Update time:
Description:
Model: VTGMA-1 1 Electrical Characteristics 1.1 LNA/Filter Form 1 No. Item Specifications Post Environmental Tolerance 1 LNA Gain 28? dB / 38? dB ?.5 dB 2 Noise Figure 1.5 dB ? 3 Filter Out Band Attenuation 14dB Min f0+50MHz 18dB Min f0-50MHz 30dB Min f0+100MHz 42dB Min f0-100MHz ?.0 dB 4 DC Voltage 3~5V 5 DC Current 6~12mA 1.2 Mechanical Form 2 No. Item Specification 1 Cable RG58 2 Connector SMA or others 3 Plastic Housing White 4 Mounting Screw 5 Weight 0.2KG（Without Connector and Cable） 2 Reliability Condition：Temperature: 40?℃ Load: DC=5V?.5 V Quantity: 2000pcs Sustained Time: 480h 3 Environmental Specifications Condition：Post Environmental Tolerance (Refer to the form 1) Temperature range 25?℃ Relative Humidity range 55~75%RH Operating Temperature range -40℃~+85℃ Storage Temperature range -40℃~+100℃ 3.1 Moisture Proof The device should satisfy the electrical characteristics specified in form 1 after exposed to the temperature 40?℃and the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition. 3.2 Vibration Resist The device should satisfy the electrical characteristics specified in form 1 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 3.3 Drop Shock The device should satisfy the electrical characteristics specified in form 1 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device. 3.4 High Temperature Endurance The device should satisfy the electrical characteristics specified in form 1 after exposed to temperature 80?℃for 24? hours and 1~2 hours recovery time under normal temperature. 3.5 Low Temperature Endurance The device should also satisfy the electrical characteristics specified in form 1 after exposed to the temperature -40℃?℃for 24? hours and to 2 hours recovery time under normal temperature. 3.6 Temperature Cycle Test The device should also satisfy the electrical characteristics specified in form 1 after exposed to the low temperature -25℃ and high temperature +85℃ for 30? min each by 5 cycles and 1 to 2 hours recovery time under normal temperature. 4 Weatherproof Put the antennas in 1m deep water for 12h, and find 100% waterproof.
[Total 1 Pages,10 Products] First page Previous 5 pages 1 Next 5 pages Last Pages
| GPS Patch Antenna for Branded & Imprinted. Original Designs Direct
From Top China Wholesale Source! Wanting to purchase a promotional product to promote your company's branding then look no further because here at Sz-wholesale.com we offer a great selection of GPS Patch Antenna Branded. These promotional GPS Patch Antenna Imprinted are made from tough durable materials making them all the more cost efficient. These GPS Patch Antenna Branded will make you the talk of the next trade show. So why delay let us help you find a great set of Wholesale GPS Patch Antenna today. For more information or if you can't find a particular item, regarding GPS Patch Antenna Branded then browse our website. Wholesaler in China. |
