Cabinet Lock, Ib Card Lock, Key Card Lock, Cipher Lock Description
Features:1) Function card.
a) Mother card: it is defined on the lock, is used to set, create or terminate
Guest card.
b) Guest card: key of the lock, it is authorized by Mother card.
c) The lock works on the principle of remembering the card's ID, so one
card can be shared by all of the locks.
2) Unlock the lock: touch the valid Guest card or Mother card to the hole in the
cover, then the lock unlocked.
3) Unlocking mode: you can set the unlocking mode before installing the lock,
as chart below.
4) Turn the Mode button to the right (near the set button), when unlock, the
lock will lock automatically 5 seconds later (default mode)
5) Turn the Mode button to the left (far from the set button), when touch
card to unlock, the lock will keep unlocking status, touch card again to lock
the lock.
6) Issue Mother card: press the set button, after a "tick", touch the card which
you want to become Mother card to the lock, after a long "tick" and a short
"tick", the card is recognized as Mother card by the lock. Each lock can
has only one Mother card, the last one replaces the prior one. When
create Mother card, the waiter cards and guest cards issued before will be
canceled.
7) Issue Guest card: touch the Mother card to the lock for once, after a "tick"
and the LED lights in green, touch the Mother card to the lock again before
the LED stops lighting, after a 'tick' and the LED flashes in green. Touch
the card which you want to become Guest card to the lock; after a "tick" the
card is recognized as Guest card by the lock (you can continue to touch the
other cards before the LED stops flashing. After 6 seconds you touch the last
card, LED stops flashing) .
8) Cancel the specified Guest card: method is the same with issuing Guest card,
touch the Mother Card to the lock for once, after a 'tick' and the LED light in
green, touch the Mother Card to the lock again before the LED stops lighting,
after a 'tick' and the LED flashes.
