Split Pressurized Solar Water Description
The split pressurized solar water heater is composed of heat collector, storage tank,electric control device, working station and installation parts.Features:
1) Uses structure of heat collector separated from storage tank
2) The heat collector can be put on balcony, roof or flat place or outdoor wall surface. The storage tank can be put anywhere in room according to your need
3) Successfully carries out installation of separation according to fabricating yard and is harmoniously blended with architecture
4) The water quality achieved the tap water standard, and it is environmentally friendly and energy saving
5) The heat transfer rate is quick, without volatile tubes and without incrusting
6) The heat exchange uses the natural circulation form, which saves electricity
7) Digital display of water temperature
8) Anti-freeze: no water inside the tubes when it works
Specifications:
1) vacuum tube with heat Pipe : 47 x 1,500mm; 58 x 1,800mm
2) Water tank capacity: 100L-400L
3) The length of heat-gathered tube: 1.5m/1.8 m
4) The number of heat-gathered tube: 12/15/20/24/30 /36
5) Pressure: 0.6MPa
6) Heat holding material: polyurethane
7) Water tank material (inside): porcelain enamel or stainless steel
8) Water tank material (outside): galvanized sheet
9) Mainfold material: Aluminum alloy & red copper.
_100.jpg)
