Solar Energy System Description
The Solar powered System uses the sun as it'energy source , It can supply you with clean and environmental friendly electricity in many areas .They are used for Lighting Homes, Charging Mobile Phones, Radio, Digital camera, MP3,MP4, Ipod , Game player, DC TV etc , They are green and free power station for the Island, remote mountain areas ,pasturing areas, plain and disaster areas etc.Specifications:
1. One Piece 10W poly crystalline or Amorphous solar module with 25years life time.
2. One Piece 12V 7a/h sealed maintenance-free lead acid battery bank,
3. There pieces 12V/1.5 LED lamps or 12V 5W energy saving lamp
4. 3-5-8 meters cables with lam holders
5. One Piece cigarette lighter socket
6. One Piece mobile phone charge cables
Other Optional Accessories:(Not included)
1. AC-DC Adapter.
2. Mini Fan & LED Table Lamp.
3. Mobile Phone Connectors
Operation Instruction:
1. Keep the solar panel face the sun. Plug the solar panels' jack into the solar panel charging socket. Always keep a right angle possible in order to have a better sunlight collecting effect. You can fix and adjust the solar panel's angle according to the latitude in your areas
2. Do not place the solar panel on the hot surface to avoid reducing the charging performance.
3.Keep the control box in a dry place and do not put the control box upside down nor strike it to avoid any battery leakage and damage.
4.Handle the switch buttons and plugs gently to avoid any damage.
5.Pay attention to the indicator board and charge the battery bank in time before using when the Battery 's indicator becomes Red
6. Keep the switch on the main board "ON" When use the system and "OFF" when you stop using or in repair.
7.Please charge the battery bank at least 1 time every 3 months if no use it in order to keep the battery bank have a long cycle life.
8. AW-SES10W 's maximum output load is 80W, AW-SES8W is 50W, AW-SES5W is 30W.
9. No one except professinal technicians is permitted to disassemble the solar system without our permission to avoid damaging the system.
Indicator Instructions:
Charge: Green LED shines when the white socket is used to charge digital appliances below 9.8V ,It does show the 3 black socket has output.
Solar: Yellow LED shines when the solar panel is plugged in and the voltage is high enough to generate the charging current. If the solar panel' voltage is lower than 12V, it won't be able to generate the charging current and won't shine.
Battery: Green LED shines when the voltage of the battery is in normal condition and you can use the system any time.
Green LED flashing means the appliances are fully charged and it is suggested that you plug off the solar panel.
Red LED flashing means the voltage of the battery is lower than 11.6V and the system has cut off the output.
Red LED shining means the voltage of the battery is lower than 12V, and you need to charge it in time.
Red and Green LED flashing in turn means that short circuit has happened. Please restart the system and everything will be ok
