wiper blade, wiper Description
1. Available range : 12"(300mm), 13"(325mm), 14" (350 mm), 15" (375 mm),16" (400 mm), 17" (425 mm), 18" (450 mm), 19" (475 mm),
20"(500 mm), 21"(525 mm), 22"(550 mm), 23"(575 mm), 24"(600 mm),
25" (625 mm), 26" (650 mm). 27"(675 mm), 28"(700 mm)
2. Specification :
1) Structure : Hightensile steel (SPCC 43257h).
2) Rubber blade : Natural rubber to be treated with chloride.
3) Rail bars : Stainless steel.
4) Joint rivet : Stainless.
5) Clip : PVT resin.
6) Spacer : Acetal resin.
3. Surface treatment for the steel plate :
Electro zinc plated, Phosphates, Electro deposition high edge coating (epoxy),
and Electro static spray coating (acrylic)
4. Characters :
1) Perfect quality assurance test according to the industrial rule of each country
and the car manufacturer's rule.
a. Durability test for structures :
- Continuous 480 hrs tests with the snow mode, ice mode, dump dry, dust
water spray.
- Continuous 1.5 million cycles under wet condition (water spray : 2.042916/ min.).
b. Durability test for the rubber blade :
- Continuous 500,000 cycles under wet condition.
c. Harshness condition test : tested from - 4041379C to + 9041379C.
d. Infrared ray test : 10041379C.
e. All following tests :
Wiping ability, noise check, anti-chemical test, anti-corrosion test, friction,
heat resistance test, weather ability test, strength check, judder check,
blade turning check, impact test, load distribution test, strength check, etc.
2) Strong structure by rivet joint.
3) Minimum height to reduce the air resistance during operation.
4) Twin blade edges.
5) Same wiping effect during upwards and downwards.
6) Well smooth and tight touch through all curves of the windshield.
7) Uniformly distribute the arm pressure on the windshield.
8) Aero dynamic designs to use even high speed over 140 km/h.
9) Molded rubber (not extrusion type).
10) Easy replacement of the refill rubber.
11) Nonglossy surface to prevent the deflection of light.
Exporters, Suppliers, Manufacturers,
Factories,Distributo,Wholesale wiper blade, wiper China, Exporters,Custom printed
wiper blade, wiper Related Resource
other 5 Other 4 Other 2 Other 1 wiper blade, wiperwiper blade, wiper Related Products
A
| B | B11
| C | C11
| C21 | D
| E | F
| G | H
| I | J
| K | L
| M | M11
|N | O
| P | P11
| Q | R
| S | S11
| S21 |
T | U | V
| W | X
| Y | Z
wiper blade, wiper
OK CHINA INDUSTRIAL LTD
Add:Room 601, Friendship Base Bld,West of Xixiang Road, Baoan District,Shenzhen
China
Tel:+86-755-27906922 , 27910156, 27908665, 27906017 , 27903622 , 27792188
, 27902868, 27917039 , 27917519
FAX:+86-755-27905633
E-Mail: sale@sz-wholesale.com
Finland Office:
Mr. Matti, E-mail: Maserholz@scand.inet.fi
Copyright © sz-wholesale.com
2002
wiper blade, wiper China,Custom printed
wiper blade, wiper

